Hand in hand meeting CH-1000

▼Basic characteristics of the master

Each channel can control up to 36 sets of attendance units, conventional products can be connected to 72 sets of attendance units, and additional anti-capacity equipment can be connected to more than 500 sets of attendance units.

This machine has a light appearance and can be placed flat on one side or installed in a 19-inch standard cabinet.

Power: 50W

With parallel line output interface; left and right line output interface; and non-parallel output interface to adapt to various device connection methods.

The machine itself does not have a power amplifier speaker, it needs to be used in combination with a power amplifier and sound.

▼Characteristics of CH-100A chairman microphone

Frequency response: 100～16000Hz

Sensitivity: -40±2dB

Pickup distance: 20～80cm

The unit is powered by the system host, the input voltage is DC18V, which belongs to the controllable range

The chairman microphone has the priority function of forcibly cutting off the speech of the representative unit.

The unit has a single key for speaking and an indicator light, which can freely control the speaking state.

When starting to speak, the red light ring glows at the same time, which can clearly indicate the position of the speaker.

Using condenser microphone core, the microphone tube adopts a winding design, and is equipped with a replaceable windshield, and the microphone pole has an extended type to choose from.

Use hand in hand to join.

The number of chairman units in the system is not limited and can be placed anywhere in the loop.

▼CH-100B represents the characteristics of the microphone

Frequency response: 100～16000Hz

Sensitivity: -40±2dB

Pickup distance: 20～80cm

The unit is powered by the system host, and the input voltage is DC18V.

The unit has a single key for speaking and an indicator light, which can freely control the speaking state.

When starting to speak, the red light ring glows at the same time, which can clearly indicate the position of the speaker.

Use a condenser microphone core, the microphone tube adopts a winding design, and is equipped with a replaceable windshield,

The microphone pole has an extended type to choose from.

Use hand in hand to join.